No Feedback Marine Boat Mechanical Rotary Steering System Kit

Tips: A mechanical steering system is not recommended for use on boats equipped with engines that exceed the maximum horsepower rating of the boat and the speed of 50 knots(57.5mph)

The quality Stern Drive Hydraulic Steering Kit is a hydraulic steering system for ships, designed specifically for stern drive ships. The kit achieves precise control of ship steering through the synergy of hydraulic pumps and hydraulic cylinders. The main advantages of hydraulic steering systems are their smooth and efficient operation, allowing the captain to easily control the direction of the ship even at high speeds and under heavy loads.

In addition, the Stern Drive Hydraulic Steering Kit reduces the captain's operating effort, reduces control fatigue, and improves overall navigation safety and comfort. It is particularly suitable for ships that require frequent steering and high-precision control, such as speedboats and yachts. Overall, the Hydraulic Steering Kit not only improves the ship's control performance but also enhances the user's sailing experience.

Details:

●  Standard 3/4" tapered steering shaft

●  Maximum stroke: 9inch(225mm)

●  Minimum cable bend radius: 8inch (220 mm)

●  Maximum working load at Tiller end: 5000N

●  Cable outer diameter: 15.8mm

●  Spiral inner cable diameter: 8mm

●  Max steering wheel diameter: 16inch(400mm)

●  Turns lock-to-lock: 4 turn

Specifications:

●  N.W.: 7.6kg

●  G.W.: 8.1kg

●  Packing Method: Carton box

●  Packing Size: L60*W48*H18(cm)

Support customization, please let us know your requirements.

​

How to Measure Steering Cables:

Replacement of Existing Cable:

If possible, find the part number stamped on the plastic jacket of the old cable.

If you removed the old cable, measure for the replacement cable as follows:

Order Length: L= "A" dimension + "B" dimension

Example: L=440mm+2730mm=3170mm

To order in foot length, divide for 3170mm and round up to the next whole foot

3170mm=11'8". round up to 12"

New Installation:

Measure cable routing path from wheel center line to engine connection, as follows:

A=Center line of wheel gunwale (or deck, if routed downward)

B=Dash to transom

C=Gunwale to center line of cable connection at centered tiller

For Cable Installation Through The Engine Tilt Tube:

Add A, B&C+6", then round up to the next foot. Order that length cable.

For cables mounted to transom, splash well or stringer:

Add A, B&C, then subtract 6" and round up to the next foot. Order that length cable.