Marine Boat Mechanical Planetary Steering System Kit

Tips: mechanical steering system is not recommended used on boats equipped with engines that exceed the maximum horsepower rating of the boat and the speed of 50 knots(57.5mph)

Feature:

●  Planetary gear reducer

●  Smaller clutch free play

●  Thread connect, easy installation

●  Galvanized steel shaft

●  Cable output ends of 316 stainless steel

●  90° engineering plastic bezel kits

●  High press die cast zinc alloy helm cover, shot blast finishing

Details:

●  Standard 3/4" tapered steering shaft

●  Maximum stroke: 9inch(225mm)

●  Minimum cable bend radius: 8inch (220 mm)

●  Maximum working load at Tiller end: 5000N

●  Cable outer diameter: 15.8mm

●  Spiral inner cable diameter: 8mm

●  Max steering wheel dia: 16inch(400mm)

●  Turns lock-to-lock: 4 turn

Specifications:

●  N.W. : 6.1kg

●  G.W. : 7kg

●  Packing Method: Carton box

●  Packing Size: L60*W48*H18(cm)

Support customization, please let us know your requirements.

​

How to Measure Steering Cables

Replacement of Existing Cable:

If possible, find the part number stamped on the plastic jacket of the old cable.

If you removed the old cable, measure for the replacement cable as follows:

Order Length: L= "A" dimension + "B" dimension

Example: L=440mm+2730mm=3170mm

To order in foot length, divide for 3170mm and round up to the next whole foot

3170mm=11'8". round up to 12"

New Installation:

Measure cable routing path from wheel center line to engine connection, as follows:

A=Center line of wheel gunwale (or deck, if routed downward)

B=Dash to transom

C=Gunwale to center line of cable connection at centered tiller

For Cable Installation Through The Engine Tilt Tube:

Add A, B&C+6", then round up to the next foot. Order that length cable.

For cables mounted to transom, splash well or stringer:

Add A, B&C, then subtract 6" and round up to the next foot. Order that length cable.