Description:

The Mercury single engine console mount throttle, featuring an ergonomic, soft-grip handle and a slim profile, delivers smooth handling and responsive controls. This throttle is compatible with all current Mercury/Mariner outboard motors with integral trim. This control features a single trim switch in the port handle for trim and comes with the trim harness (attached to switch) with the white connector.

Feature:

[Power Trim & Tilt Switch] The power trim and tilt switch are attached to the control lever grip. Used to trim or raise driver unit for trailering, launching, beaching, or shallow water operation. Pushing it UP trims up and tilts up the engine and pushing it DOWN trims down and tilts down the engine.

[Friction Adjustment] The nut can be adjusted to increase or decrease the friction on the control handle, preventing creep on the remote-control handle. By turning in or out the throttle friction screw of the remote-control box, the stiffness of the control lever can be adjusted. Turning the adjusting screw to the right makes the control lever stiff to turn, and vice versa.

[Easy to use Fast Idle Button] With control handle in Neutral and fast idle feature not activated, move control handle to Forward gear or Reverse gear position. Continue movement of control handle in same direction to open (advance) throttle.

Note:

All installations require an Ignition/Choke harness and throttle/shift cables to complete the installation. This control requires the use of Mercury/Quicksilver GEN II shift and throttle cables.

Fit:

Fits all current Mercury/Mariner outboards (with integral trim) and 1993 and newer, Force outboards 40 HP and higher utilizing Mercury style cables (with power trim).

8/9.9 Four-Stroke engines 2005 and newer and 8/9.9 generation change above S/N OR192772 and 15/20 Four-Stroke will use Gen II T/S Cable.